Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateRaynor Torsion Spring Replacement: The West Palm Beach Owner’s Guide
A Raynor torsion spring replacement in West Palm Beach typically costs $180 – $340 installed, and we stock Raynor-compatible springs on our trucks for same-day replacement in most cases. You’ll usually discover the spring has failed when the door won’t lift, or you hear a sound like a firecracker going off in the garage. The spring is the large coil mounted horizontally above the door that does the heavy lifting; when it snaps, the door becomes dead weight.
We’re Doyle Garage Doors West Palm Beach, an independent service provider (not affiliated with Raynor), and we’ve been replacing torsion springs on Raynor doors across West Palm Beach since 2001. This page covers exactly what you need to know: which models we service, how to spot a failing spring, what you’ll pay, and how fast we can get it done.
Which Raynor Models This Applies To
Raynor builds residential doors under several lines: the Admiral, Aspen, Century, Decade, Designer, and Pilot series, plus commercial lines like the Raynor TriCore. Each series uses different torsion spring specifications: wire gauge, inside diameter, spring length, and wind direction (left-hand or right-hand wound). The Pilot series, for example, typically uses smaller-diameter springs than the heavy Admiral and Aspen lines. A spring off by even 1/8 inch in wire gauge changes the lifting force enough to strain your opener.
The reliable way to match your Raynor spring is what we do on site: read the painted color code or printed tag on the existing spring, measure the wire diameter with a caliper, count the coils, and confirm the door’s weight. If you’re deciding between an OEM Raynor spring and a quality aftermarket equivalent, here’s the honest take: Raynor-branded springs meet factory spec, but most of the aftermarket springs we carry come from the same U.S. manufacturers that supply the factory, and they carry the same cycle-life rating. We stock both. What matters more than the label is that whoever installs it matches the spring to the door’s measured weight, not just the old part. Florida humidity and salt air near the coast shorten spring life compared to drier climates, so we often recommend a high-cycle spring (25,000 – 30,000 cycles) over the standard 10,000-cycle spring for West Palm Beach homes.
Styles & brands we work with






Signs Your Raynor Torsion Spring Replacement Is Failing
- Door opens a few inches, then stops. The spring has lost tension and can no longer counterbalance the door’s weight. The opener motor strains, and you’ll hear it laboring before the safety reverse kicks in.
- Visible gap in the coil. Torsion springs snap cleanly, usually near the center or at the winding cone. If you can see a 1/4-inch gap in the coil, the spring is broken and the door is unsafe to operate manually.
- The door is suddenly much heavier than before. With a broken spring, a manually lifted Raynor door feels like it weighs 150 pounds or more. That’s because it does: the spring was doing the lifting, not you.
- Bent upper track or opener rail. When a spring breaks and the door runs off balance, the opener keeps pulling and starts bending the rail. We see this regularly in older Raynor installs in neighborhoods like Northwood Hills and Flamingo Park.
- Loud snap from the garage, often at night. Springs most often break when they’re under full tension with the door closed, which is why so many West Palm Beach homeowners hear the crack overnight and find the door dead in the morning.
Replacement Cost & What’s Included
For a Raynor torsion spring replacement in West Palm Beach, you’re looking at $180 – $340 installed. That range covers both springs, not one. We replace both springs on every job, because on a Raynor door the two springs wear together: the one that didn’t break is usually within 20% of failing. Here’s the breakdown:
- Single spring replacement: $180 – $240 (we still recommend doing both)
- Double spring replacement: $250 – $340
- High-cycle spring upgrade: Adds $40 – $70, worthwhile if you’re within 5 miles of the coast
The quote includes the springs, labor, balancing the door, lubricating all moving parts, and a written price handed to you before any work starts. No verbal estimates, no surprise line items on the invoice. Every spring replacement from Doyle Garage Doors West Palm Beach carries our 365-Day Done Right Promise: if it fails within 365 days, we come back and make it right at no charge. That’s in writing, every time.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
A torsion spring is not a weekend project, and we say that because we’ve seen what happens when it goes wrong. These springs hold 150 to 250 pounds of torque when wound. If a winding bar slips, the spring unwinds with enough force to break fingers, hands, or worse. What you can safely do is inspect: look for a gap in the coil, check if the cables are loose, and confirm whether the door is balanced by lifting it a few inches and letting go. What you shouldn’t do is try to unwind, rewind, or remove a spring yourself. That’s the line.
We do offer same-day Raynor spring replacement across West Palm Beach, and we carry the common Raynor sizes on the truck: wire gauges from .207 to .250, inside diameters of 1-3/4 and 2 inches, left-hand and right-hand wound. If your spring is an oddball, we can still usually have it by the next morning. Call (728) 220-0705 and a real person answers, day or night.
FAQs
Expect 7 – 12 years on a standard 10,000-cycle spring in West Palm Beach, less if you’re near salt air in neighborhoods like El Cid or south of Southern Boulevard. Our high-cycle springs typically stretch that to 15 years or more. Call (728) 220-0705 and we’ll tell you what’s on your door now and what a realistic lifespan looks like given your distance from the coast.
No. A broken torsion spring is replaced, not repaired. Coils can’t be welded or re-tensioned safely. The honest move is matching a new spring to your door and installing it right the first time. Call (728) 220-0705 for a written quote before we touch a bolt.
Most Raynor spring replacements take 45 – 90 minutes from arrival to test cycle. We carry the common sizes on the truck, so if we have your spring, it’s one visit. The price is quoted and agreed before any work starts, so you’ll know the total before we begin. Call (728) 220-0705 and we’ll confirm what’s in stock for your door.
Yes. Our West Palm Beach trucks carry the most common Raynor spring sizes in both left-hand and right-hand wind, plus high-cycle options. If yours isn’t on board, we can usually source it same-day or next morning from our local suppliers. We also stock springs for LiftMaster, Chamberlain, and Genie openers, but the Raynor springs are on every truck. Call (728) 220-0705 and ask; we’ll check the truck inventory while you’re on the line.
Call Doyle Garage Doors West Palm Beach
If your Raynor door won’t lift, don’t force it. The spring has failed, the door is heavier than it should be, and the longer it sits, the more strain you put on cables, rollers, and the opener gear. Aaron Teague and our crew have been replacing Raynor torsion springs in West Palm Beach for years, from quick swaps in Northwood Hills to full service calls near Clematis Street. Every job comes with a written price before we start, a name and photo of your technician sent before arrival, and our 365-Day Done Right Promise in writing. Tell me what it’s doing, and I’ll tell you what it needs: no guesswork, no runaround. Call (728) 220-0705 for a free estimate.
Written by Aaron Teague, Owner, Doyle Garage Doors West Palm Beach at Doyle Garage Doors West Palm Beach, serving West Palm Beach and nearby areas.