Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateClopay Roller Replacement: The West Palm Beach Owner’s Guide
Clopay roller replacement in West Palm Beach typically runs $110 – $220 installed, including the parts and labor, and we stock Clopay-compatible rollers on our trucks for same-day service in most cases. You’ll usually discover a roller has failed when the door starts jerking on one side, groaning mid-travel, or hanging slightly crooked in the opening. It’s rarely subtle, and waiting on it turns a $150 fix into bent tracks, a strained opener, or a door that refuses to close all the way.
Here’s the honest picture: Clopay builds solid doors, but the rollers are wear parts. They carry the full weight of the door hundreds of times a year in Florida humidity, road salt from coastal drives near Flagler Drive, and the fine sand that works its way into every moving surface. Eventually the bearings give out, the wheel chews itself up, and the door starts fighting the track. The good news is that roller replacement is one of the fastest repairs we do, and it’s one we do right, backed by our 365-Day Done Right Promise in writing.
Which Clopay Models This Applies To
We service roller replacement across the Clopay residential line that’s common throughout West Palm Beach: the Gallery series, the Coachman carriage-house lineup, and the Classic collection you’ll see on everything from older Northwood Hills ranches to newer builds out west near Royal Palm Beach. The compatibility gotcha is the stem length and wheel diameter. Clopay uses both a standard 7/16″ radius track roller and a longer-stem variant on some Coachman and Gallery models with low-headroom track. Grab the wrong one and the roller scrapes the track’s inner edge or pops out under load.
The fastest way to identify what your door needs is to match the wheel: Clopay residential rollers are usually 2″ nylon wheels, though commercially rated doors and some 16′ models use a 3″ wheel. As for OEM versus aftermarket, the factory Clopay rollers are fine, but the brand we stock in the truck is a sealed-bearing, nylon-wheel equivalent that actually lasts longer in coastal air. Salt and humidity murder the exposed ball bearings in basic steel rollers, which is why we recommend the sealed upgrade on any door west of I-95 where the sea breeze is constant. Doyle Garage Doors West Palm Beach is an independent service provider, not affiliated with Clopay, but we’re factory-trained to work on their entire residential line.
Styles & brands we work with






Signs Your Clopay Roller Replacement Is Failing
- Jerky, uneven travel. A roller with shot bearings binds instead of spinning, so one side hangs while the other glides. The door shudders its way up. That hesitation is a roller telling you it’s done.
- A metallic groan or squeal from the track. That’s metal-to-metal contact. The nylon or steel wheel has flat-spotted and is now scraping rather than rolling. Grease doesn’t fix it; replacement does.
- The door sits slightly crooked in the opening. When one roller’s wheel is worn down or cracked, that corner drops a fraction of an inch. You may not notice until you step back and the bottom panel isn’t level.
- Visible damage during a visual check. If you can see shiny steel where nylon should be, a hairline crack through the wheel, or a stem that’s bent, don’t run the door. We’ll come handle it, and we’ll send the tech’s name and photo before we arrive.
- The door feels heavy or the opener is struggling. A failing roller adds friction. Your LiftMaster or Chamberlain opener compensates, until the day it doesn’t. Better to swap the roller before the opener’s logic board and gears take the hit.
Replacement Cost & What’s Included
In West Palm Beach, expect $110 – $220 for Clopay roller replacement, depending on how many rollers you’re replacing and whether your door uses standard nylon rollers or the sealed-bearing upgrade we recommend for coastal homes. We price the whole job before we turn a single bolt: the cost of the Clopay-compatible rollers, the labor to swap them, and the time to inspect the track, hinges, and balance while we’re in there. No add-on surprises, no “while I’m here” upsell pressure.
Here’s the breakdown for a typical single-car door:
- Rollers (parts): $15 – $45 each, depending on type
- Labor (per door): $60 – $120, which includes the full inspection
- Typical total for 4 – 5 rollers: $110 – $220
When Aaron Teague sends a technician to a home in West Palm Beach, the job comes with a written guarantee covering the replacement for 365 days from the date of repair. If a roller fails in that window, we come back and make it right at no charge. That’s the whole guarantee, in plain English, on paper.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the split. You can safely inspect your rollers: look for flat spots, cracks, missing nylon, and wobble with the door closed. What you should not do is unbolt the bottom roller bracket to try swapping it yourself. That bracket is under spring tension on most Clopay doors, and when it lets go, it goes hard. We’ve responded to calls in West Palm Beach where a homeowner tried exactly that and ended up with a bent track, a cracked panel, and a door stuck ten inches off the ground. The repair went from $150 to $600 real quick.
If you’d rather not wrestle a door that weighs a few hundred pounds and is under tension, call us at (728) 220-0705. We’ll quote the roller replacement over the phone, confirm the price in writing before any work starts, and send you the name and photo of the technician before we head your way.
FAQs
Standard steel-bearing Clopay rollers last 5 – 8 years in West Palm Beach’s coastal climate; sealed-bearing nylon roller replacements typically run 10 – 15 years, which is why we recommend them for homes within a few miles of the Intracoastal where salt air accelerates bearing wear. Call (728) 220-0705 if you’re unsure whether yours are standard or sealed.
No, a roller with a seized bearing, cracked wheel, or bent stem is a replace-only part, not a rebuildable one; the repair is swapping the roller itself and confirming the track and bracket are still square. That’s a same-visit job for us most days in West Palm Beach.
Most Clopay roller replacements take 45 – 90 minutes on site, including the full track, hinge, and balance inspection we do as standard on every roller job. If you’re calling before noon on a weekday, we can usually get a technician out the same day.
Yes, our West Palm Beach technicians carry Clopay-compatible nylon rollers in the standard and sealed-bearing versions, plus the longer-stem variant for Coachman and Gallery low-headroom tracks, so most roller replacements happen in one trip. Call (728) 220-0705 and tell us your door model; we’ll confirm the right part is on the truck before dispatch.
Call Doyle Garage Doors West Palm Beach for Clopay Roller Replacement
If your Clopay door is grinding, jerking, or hanging crooked, don’t wait until the opener burns out or the track bends. Call (728) 220-0705 and we’ll walk you through what you’re seeing, quote the repair honestly over the phone, and get a background-checked, uniformed technician to your home with your roller replacement in hand. You’ll know exactly who’s coming, exactly what it costs, and exactly what’s covered. The price is in writing before any work begins, and the work is guaranteed for 365 days. That’s how we’ve done it in West Palm Beach since 2001.
Written by Aaron Teague, Owner, Doyle Garage Doors West Palm Beach at Doyle Garage Doors West Palm Beach, serving West Palm Beach and nearby areas.